Quickly estimate the required carousel dimensions for your project. Enter the product length, diameter, weight and minimum bending radius, and the tool will calculate an indicative carousel diameter or stacking height.
Suitable for cables, flexibles and umbilicals, the tool provides a practical first-pass estimate to support project planning, budgeting and feasibility studies.
Once the project requirements have been defined, SCA's engineering team can further optimise the carousel design for fabrication, transportation and offshore or onshore operations.
Subsea Cable Assets
After entering the main product parameters, the carousel can be sized by either fixing the stacking height to obtain the required carousel diameter or vice versa.
SCA designs, fabricates and commissions amongst others demountable carousels for both on- and offshore use. This tool provides a quick estimate on initial sizing of the carousel.
Product
Sets the inner core: Ø = 2 × MBR = 7.6 m
Carousel — solve for
Returns the outer diameter needed to store the product at this height.
Returns the height the product stacks to at this diameter.
⌀ Outer diameter
internal Ø to fill to rim
▦ Total Product weight
load carried by the carousel
Fills to height
Product volume square pack
Footprint area plan
Inner core Ø 2 × MBR
—
—
Disclaimer: This tool provides indicative sizing estimates for preliminary planning purposes only. Final carousel dimensions and project requirements should always be verified through detailed engineering. SCA accepts no liability for any decisions or actions taken based solely on the results generated by this tool.
